| Basic Physical | Thickness | 2.0 mm – 5.0 mm (Customizable) | Standard sizes | Thickness affects surface density and flexibility; select based on design. |
| Surface Density | 3.96 kg/m² (2mm sample) | SGS: GB/T 29059-2012 | Far lower than natural stone (~70kg/m²), significantly reducing structural load. |
| Dimensional Stability | X-axis 0.06%, Y-axis 0.03% | SGS: GB/T 4085-2015 | Highly stable dimensions, suitable for prefabricated buildings and areas with severe temperature fluctuations. |
| Thermal Conductivity | 0.171 W/(m·K) | SGS: GB/T 10294-2008 | As a thin facing layer, thermal resistance is limited; cannot replace an insulation layer. |
| Mechanical & Bonding | Flexibility | No cracking when bent around a 200mm diameter cylinder | SGS: JG/T 311-2011 | Meets the requirements for curved walls and cylindrical surfaces; avoid sharp folds. |
| System Bond Strength | ≥ 0.4 MPa | Engineering Acceptance Std (JGJ 110) | Requires special flexible adhesive and full-coverage technique; not a single-panel property. |
| Fire & Weather | Fire Rating | A2-s1, d0 (Non-combustible, very low smoke, no droplets) | SGS: GB 8624-2012 | Suitable for high-rises and crowded places. System fire safety requires insulation layer integration. |
| Artificial Weathering | 1500h no cracking/blistering; Color change grade 0 | SGS: GB/T 1865-2009 | High-weather-resistant inorganic ink system; not easy to fade under long-term exposure. |
| Stain Resistance | Reflectance coefficient decrease rate 12% | SGS: GB/T 9780-2013 | Inorganic silicon topcoat treatment; anti-pollution and easy to clean. |
| Temp. Shock Resistance | 3 cycles (-18°C to 50°C) with no abnormality | SGS: JG/T 25-2017 | Adapts to extreme hot and cold alternating climates; no chalking or peeling. |
| Water Absorption | 11.3% | SGS: GB/T 9966.3-2020 | Moderate micro-porous structure aids breathability and ink anchoring; requires system waterproofing. |
| Environment & Health | Radioactivity | Ira < 0.1, Ir < 0.1 (Class A) | SGS: GB 6566-2010 | Class A decorative material; unrestricted indoor and outdoor use. |
| Chemical Safety (SDS) | Non-hazardous chemical | SGS: GB 30000 Series | Finished product has no continuous VOC release risk; eco-friendly and non-toxic. |
| Antiviral / Antibacterial | H1N1 activity rate 99.93%; Antibacterial rate > 99.9% | SGS: ISO 21702 / HG/T 3950 | Additional protection for special public spaces (hospitals, schools). |
| Standards & Compliance | Product Standard | Flexible Facing Tile / Modified Inorganic Powder Composite Sheet | JG/T 311 / JC/T 2219 | Complies with Chinese industry standards. |
| CE Verification | EN 15102 (System 4) | SGS: IN-GZ-CP-5627-25094 | Explicitly intended for interior walls; exterior walls require separate assessment according to local codes. |
